Product Performance
●It has excellent mechanical properties, with high strength, high modulus and low elongation.
●It has better acid and alkali resistance and chemical resistance than other fibers such as artificial fibers, nylon, polyester, etc.
●Light resistance: Under long-term sunlight, the fiber strength loss rate is much lower than other fibers.
●Corrosion resistance: The fiber will not mold, rot or be eaten by insects after being buried underground for a long time.
●The fiber has good dispersibility: the fiber does not stick together and disperses well in water.
●The fiber has good affinity with cement, plastic, etc., and the bonding strength is better than that of polypropylene, nylon, polyester and other fibers.
●It is non-toxic and harmless to the human body and the environment.
Product Standards：PVA high-strength high-modulus short fibers comply with national standards (GB/T14462-93)
Density: 1.3g/cm3
Diameter: 0.012mm
Length: 3mm, 6mm, 9mm, 12mm.
Tensile strength: 1400-1600Mpa
Dry elongation at break: 17±3.0%
Elastic modulus: 35-39Gpa
Softening point in water: 114℃
Alkali resistance: 98-100%
Product use
●Large volume concrete pouring, such as docks, high-rise building conversion beams, columns, floor slabs, etc.
●Roof treatment, basement, wall plastering mortar for industrial and civil buildings.
●Road surface and guardrails of roads and bridges.
●Concrete pouring for dams, pools, parking lots, stadiums, etc.
●Manufacturing concrete components, pipes, and plates.
●Spraying concrete for tunnels, mines, culverts, slopes, etc.
●Coastal beaches, saline-alkali areas, chemical corrosion sites.
●Replace asbestos to make cement products.
●As a cement concrete/mortar crack prevention material
●Used as a reinforcing material for plastic products, used to make safety and explosion-proof helmets, etc.
●Replaces strong rayon to make radial tire or bias tire cord.
●Used as a reinforcing material for rubber products and used to make conveyor belts, fire hoses, braided hoses, etc.
